Supported peripherals
For Alarm Panels
Paradox
MG5050, MG5050+*, SP6000, SP6000+**, SP65, EVO192 * Minimum panel firmware v1.11.001 ** Minimum panel firmware v1.10.004
DSC
PC1555, PC1616, PC832, PC864, PC1808, PC1832, PC1864, PC5005, PC5010, PC5015, PC5020
Texecom
Premier 412, Premier 816, Premier 816 PLUS, Premier 832 Elite 24, Elite 48, Elite 64, Elite 88, Elite 168 Premier 168 - Coming Soon Elite 640 - Coming soon
IDS
805, 806*, X16*, X64*, X64 Serial* * Requires an adapter board - sold separately.
Feature
Paradox
IDS
Texecom
DSC
Area & zone label sync
Multi-area control
Arm
Disarm
Stay arm
Part arm
Zone status
AC status
Bypassing
PGM
Remote programming
For Electric Fences
Nemtek
Druid 13LCD, 15LCD, 18LCD, 25LCD, 28LCD Merlin 4i Merlin Stealth M28S, M28X
JVA
Z-Range: Z11, Z13, Z14, Z18, Z114, Z28
Status
Druid
Merlin 4i
Merlin Stealth
Fence/zone state
Fence voltage mode
AC power status
Battery status
Service state
Gate status
Tamper
Energizer
Druid
Merlin 4i
Merlin Stealth
Turn on/off
Clear/reset
Siren/strobe - enable/disable
Service alarms - bypass/reset
Fence voltage - set high/low
Zones
Druid
Merlin 4i
Merlin Stealth
Turn on/off
Bypass/unbypass
Set voltage - high/low
Gate Alarm
Druid
Merlin 4i
Merlin Stealth
Set immediate/delayed
Chime enable/disable
Peripheral connection
Protocols
Serial & Keybus depending on peripheral make & model
Standard cable length
1.5m
Maximum cable length
8m
Connectors
1 x 4 pin white Molex connector 1 x 5 pin white Molex connector
See installation guide for more information.
Signals
Contact ID
Remote Connect serial bridge
Using Olarm Remote Connect, remotely access serial ports for remote management.
Software supported
Babyware Wintex IDSwift
Mechanical specifications
Packaged weight
195 g
Packaged dimensions
205 x 52 x 46 mm
Device weight
111 g
Cable weight
40 g
Device dimensions
200 x 50 x 20 mm
Enclosure material
ABS - Resin MG47F
Status indicator
RGB LED
Tamper detection & prevention
Enclosure
Designed to be tamper resistant
Wall mount
Contains tamper breakaway tab
Antennas
Tamper proof internal antennas for 0G, 4G and Wifi
Tamper detection
Optical sensor which sends alert to Olarm APP and over Contact ID
Power supply
Voltage
7 to 24VDC
Current
100 mA (typical), 250 mA (max) @12 VDC
Typically supplied from the alarm panel / electric fence energizer via the cable provided. Please ensure that the power supply can supply at least 300mA.
Internal battery
Battery
3.7V LiPo 1300mAh - 703845 or smaller
Connector
JST2
Battery holder dimensions
8 x 38 x 45 mm
Battery not included, sold seperately
Temperature
–30 to 60°C
Humidity
0 - 90% RH
Radio / wireless technologies
Connectivity
4G, 2G & Wifi
Simultaneous multi-path routing via both channels.
Olarm 0G
Backup routing on LoRaWAN and/or Sigfox (depending on model)
Mobile connectivity - 4G & 2G
Antenna type
Tamper proof internal & optional external
External antenna connecter
SMA Female Tamper protected SMA Male Antenna not included
Mobile network switching
Typically under 60 seconds depending on coverage & networks.
2G and/or 4G depending on model & coverage.
Type Approval may be required in your country / region, please ask our sales team whether your region is currently supported.
Olarm MAX - Base Model
Regions
South Africa, Africa & Europe
LTE
Category 1
LTE-FDD frequency bands
B1/3/7/8/20
GSM frequency bands
B3/8
Olarm MAX S
Regions
South Africa, Africa & Europe
LTE
Category 1
LTE-FDD frequency bands
B1/3/5/7/8/20
GSM frequency bands
B3/8
Olarm MAX G
Regions
Global
LTE
Category 1
LTE-FDD frequency bands
B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28/66
LTE-TDD frequency bands
B34/38/39/40/41
GSM frequency bands
B2/3/5/8
SIM Cards
South Africa
2 x Olarm managed local SIM cards
Global
1 x Olarm managed roaming SIM card
Wifi - 2.4GHz
WiFi standards
2.4GHz only IEEE 802.11b/g/n
Center frequency range of operating channel
2412 ~ 2484 MHz
Antenna type
Tamper proof internal
Data rate - 20MHz
11b: 1, 2, 5.5 and 11 Mbps 11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 11n: MCS0-7, 72.2 Mbps (Max)
Data rate - 40MHz
11n: MCS0-7, 150 Mbps (Max)
Tx Power
13 to 19.5 dB (Data rate dependent)
Rx Sensitivity
-69 to -97 dBm (Data rate dependent)
Encryption
WPA2-PSK
WPS set up
Yes
0G / LPWAN connectivity
Antenna type
Tamper proof internal
External antenna connecter
None
Mode
Backup to 4G & Wifi
Olarm MAX - Base Model
0G technologies
LoRaWAN & Sigfox
LoRaWAN frequency bands
EU863-870, AS923, KR920-923
Sigfox region
RC1
Olarm MAX S
0G technologies
LoRaWAN & Sigfox
LoRaWAN frequency bands
EU863-870, AS923, KR920-923
Sigfox region
RC1
Olarm MAX G
0G technology
LoRaWAN only
LoRaWAN frequency bands
IN865, EU868, AU915, US915, KR920, RU864, AS923-1/2/3/4
Encryption
TLS 1.2 / AES-128
Configuration
Plug-and-play zero configuration via scanning the device QR Code from within the Olarm APP.
Olarm APP users
Unlimited.
The Olarm MAX will require an active subscription to function. Please contact your installer or speak to sales@olarm.com for more information.
Included in the box
1x Olarm MAX
1x Tamper proof wall mount
Mounting hardware
1x Reversible 1.5m peripheral cable
Certifications, accreditations & test reports
Safety & Health
EN 62368-1:2014+A11: (2017)
IEC 62368-1: (2014)
RF Exposure / SAR
EN 62311:2022
Electromagnetic Compatibility
ETSI EN 301 489-1: V2.2.3 (2019-11)
ETSI EN 301 489-3: V2.1.1 (2019-03)
ETSI EN 301 489-17: V3.2.4 (2020-09)
ETSI EN 301 489-19: V2.1.1
ETSI EN 301 489-52: V1.1.0 (2016-11)
EN 50130-4: 2011+A1:2014
Radio Spectrum Efficiency
ETSI EN 301 511: V12.5.1 (2017-03)
ETSI TS 151 010-1 V12.8.0 (2016-05)
ETSI EN 301 908-1: V15.1.1 (2021-09)
ETSI EN 301 908-13: V13.2.1 (2022-02)
ETSI EN 300 220-1: V3.1.1 (2017-02)
ETSI EN 300 220-2: V3.2.1 (2018-06)
ETSI EN 300 328: V2.2.2 (2019-07)
ETSI EN 303 413: V1.2.1 (2021-04)
Accessories
Cables & Adapter Boards
Olarm MAX devices include a standard cable in the box. Longer cables are available for purchase if required.
1.5m Cable

8m Cable

Upgrade Your Security

