Olarm PRO 4G

JVA Installation Guide

Z11

Z13

Z14

Z18

Z25

Z28

Z114

1

JVA integration currently requires custom firmware, please contact support with your Olarm Serial and mention you are connecting to a JVA fence.

2

Olarm PRO requires an active subscription to function. You can purchase a subscription through your installer, Alarm response company or directly in the Olarm APP.

This product should be installed by a qualified installer. Your energizer contains high voltage components that are dangerous even after the mains and battery have been disconnected. Take CAUTION while the energizer is uncovered.

Olarm PRO 4G

JVA Installation Guide

Z11

Z13

Z14

Z18

Z25

Z28

Z114

1

JVA integration currently requires custom firmware, please contact support with your Olarm Serial and mention you are connecting to a JVA fence.

2

Olarm PRO requires an active subscription to function. You can purchase a subscription through your installer, Alarm response company or directly in the Olarm APP.

This product should be installed by a qualified installer. Your energizer contains high voltage components that are dangerous even after the mains and battery have been disconnected. Take CAUTION while the energizer is uncovered.

Olarm PRO 4G

JVA Installation Guide

Z11

Z13

Z14

Z18

Z25

Z28

Z114

1

JVA integration currently requires custom firmware, please contact support with your Olarm Serial and mention you are connecting to a JVA fence.

2

Olarm PRO requires an active subscription to function. You can purchase a subscription through your installer, Alarm response company or directly in the Olarm APP.

This product should be installed by a qualified installer. Your energizer contains high voltage components that are dangerous even after the mains and battery have been disconnected. Take CAUTION while the energizer is uncovered.

Status

Z Range

Fence/zone state

AC power status

Battery status

Energizer

Z Range

Turn on/off

Clear/reset

Siren/strobe - enable/disable

Fence voltage - set high/low

Zones

Z Range

Turn on/off

Set voltage - high/low

Feed/return voltage

Gate Alarm

Z Range

Gate enable

Gate bypass

Included in the box

1x Olarm PRO 4G

1x Reversible 1.5m Peripheral cable

1x Mounting Template: Drill hole template and LED colour legend

Mounting hardware

Olarm PRO and JVA Z Range Installation

Z11

Z13

Z14

Z18

Z25

Z28

Z114

1

Locate your Energizer

1

Locate your Nemtek electric fence energizer

Z11

Z13

Z14

Z18

Z25

Z28

Z114

2

Disarm and Power down the electric fence energizer

Ensure all fence-zones are disarmed prior to powering down. Unplug the mains and disconnect the battery from the electric fence energizer before you continue.

Why do energizers need to be turned off during connection?

3

Connect the Olarm PRO to the electric fence energizer

Cut the 5-pin side of the connector cable and strip the wires so you can insert them into the JVA electric fence energizer terminals.

Z Range Single Zone

Z11

Z13

Z14

Z18

Z114

Z Range dual zone

Z25

Z28

4

Power up the JVA electric fence energizer

Plug the mains back into the power source and reconnect the battery to the electric fence energizer. Check all fence-zones are disarmed to ensure the Olarm PRO can receive the energizer’s configuration.

⚠️ Important


You will be prompted to enter your User PIN in the Olarm APP. These are by default 1234. Please contact the JVA installer should this not work.


Please keep in mind that for the Olarm PRO to detect the energizer configuration correctly, it's necessary to disarm all zones. Failure to do so will prevent the Olarm PRO from controlling the energizer.

🔓 If you have have groups of energizers ensure each one is disarmed.

5

LED states of the Olarm PRO

Check your Olarm PRO’s status. Only after the Olarm PRO exhibits a blue LED indicating "Connected, all okay," should you arm the energizer. This sequence is vital to enable the Olarm PRO to access and store the energizer's configuration, which can only be retrieved the energizer zones are in a disarmed state.

White

System is booting up

Flashing Green

Connecting to panel

Flashing Blue

Connecting to cloud

Blue

Connected, all okay

Red

Cannot connect to panel

Orange

Cannot connect to cloud

Yellow

WPS mode active

Red & Orange

Cannot connect to panel & cannot connect to cloud

Purple

Firmware upgrading

⚠️ Do not power the device off

Purple & Blue

Connected, all okay & Firmware upgrading

⚠️ Do not power the device off

Purple & Green

Connecting to panel & Firmware upgrading

⚠️ Do not power the device off

Purple & Red

Cannot connect to panel & Firmware upgrading

⚠️ Do not power the device off

5

LED states of the Olarm PRO

Check your Olarm PRO’s status. Only after the Olarm PRO exhibits a blue LED indicating "Connected, all okay," should you arm the energizer. This sequence is vital to enable the Olarm PRO to access and store the energizer's configuration, which can only be retrieved the energizer zones are in a disarmed state.

White

System is booting up

Flashing Green

Connecting to panel

Flashing Blue

Connecting to cloud

Blue

Connected, all okay

Red

Cannot connect to panel

Orange

Cannot connect to cloud

Yellow

WPS mode active

Red & Orange

Cannot connect to panel & cannot connect to cloud

Purple

Firmware upgrading

⚠️ Do not power the device off

Purple & Blue

Connected, all okay & Firmware upgrading

⚠️ Do not power the device off

Purple & Green

Connecting to panel & Firmware upgrading

⚠️ Do not power the device off

Purple & Red

Cannot connect to panel & Firmware upgrading

⚠️ Do not power the device off

6

Mount the Olarm PRO

Secure your device using the screws and drill template provided. We recommend placing the Olarm PRO away from the JVA energizer.

⚠️ Important


Avoid mounting the Olarm PRO near other radio equipment to prevent interference that could affect device performance.

Please note that the Olarm PRO is not weather-resistant. If you plan to install it outdoors, ensure it's in a suitable non-metal enclosure.

7

Connect to WiFi using the Olarm for JVA App

Please follow the guide in the Olarm APP to connect your Olarm PRO to WiFi for enhanced connectivity. You can now enjoy the convenience & peace of mind brought to you by the Olarm JVA App.

⚠️ Important

8

Troubleshooting JVA connection problems

⚠️ Important


When making changes to the JVA energizer configuration, remember to reboot the Olarm PRO and disarm all energizers as explained in step 2.


Things to note 👀

  • The Olarm PRO functions as a keypad when installed on a JVA energizer and will automatically receive status updates from connected energizers.

  • If any energizers are missing, please check the cable connections and ensure that the JVA energizers are configured correctly.

  • If you don't see any Energizer cards on the home screen or zone/gate cards on the zone screen, please ensure that all energizer zones are disarmed, including zones on all daisy-chained energizers.

Upgrade Your Security

Olarm PRO 4G Alarm Communicator

Customers

Buy Olarm

Partners

Sell Olarm