Status
Z Range
Fence/zone state
AC power status
Battery status
Energizer
Z Range
Turn on/off
Clear/reset
Siren/strobe - enable/disable
Fence voltage - set high/low
Zones
Z Range
Turn on/off
Set voltage - high/low
Feed/return voltage
Gate Alarm
Z Range
Gate enable
Gate bypass
Included in the box
1x Olarm PRO 4G
1x Reversible 1.5m Peripheral cable
1x Mounting Template: Drill hole template and LED colour legend
Mounting hardware
Olarm PRO and JVA Z Range Installation
Z11
Z13
Z14
Z18
Z25
Z28
Z114
Z11
Z13
Z14
Z18
Z25
Z28
Z114
2
Disarm and Power down the electric fence energizer
Ensure all fence-zones are disarmed prior to powering down. Unplug the mains and disconnect the battery from the electric fence energizer before you continue.
Why do energizers need to be turned off during connection?
3
Connect the Olarm PRO to the electric fence energizer
Cut the 5-pin side of the connector cable and strip the wires so you can insert them into the JVA electric fence energizer terminals.
Z Range Single Zone
Z11
Z13
Z14
Z18
Z114
Z Range dual zone
Z25
Z28
4
Power up the JVA electric fence energizer
Plug the mains back into the power source and reconnect the battery to the electric fence energizer. Check all fence-zones are disarmed to ensure the Olarm PRO can receive the energizer’s configuration.
⚠️ Important
You will be prompted to enter your User PIN in the Olarm APP. These are by default 1234. Please contact the JVA installer should this not work.
Please keep in mind that for the Olarm PRO to detect the energizer configuration correctly, it's necessary to disarm all zones. Failure to do so will prevent the Olarm PRO from controlling the energizer.
🔓 If you have have groups of energizers ensure each one is disarmed.
6
Mount the Olarm PRO
Secure your device using the screws and drill template provided. We recommend placing the Olarm PRO away from the JVA energizer.
⚠️ Important
Avoid mounting the Olarm PRO near other radio equipment to prevent interference that could affect device performance.
Please note that the Olarm PRO is not weather-resistant. If you plan to install it outdoors, ensure it's in a suitable non-metal enclosure.
7
Connect to WiFi using the Olarm for JVA App
Please follow the guide in the Olarm APP to connect your Olarm PRO to WiFi for enhanced connectivity. You can now enjoy the convenience & peace of mind brought to you by the Olarm JVA App.
⚠️ Important
The Olarm PRO needs an active GSM connection to set-up WiFi.
The Olarm PRO only supports 2.4GHz WiFi.
See more: How to set up a WiFi connection
8
Troubleshooting JVA connection problems
⚠️ Important
When making changes to the JVA energizer configuration, remember to reboot the Olarm PRO and disarm all energizers as explained in step 2.
Things to note 👀
The Olarm PRO functions as a keypad when installed on a JVA energizer and will automatically receive status updates from connected energizers.
If any energizers are missing, please check the cable connections and ensure that the JVA energizers are configured correctly.
If you don't see any Energizer cards on the home screen or zone/gate cards on the zone screen, please ensure that all energizer zones are disarmed, including zones on all daisy-chained energizers.
Upgrade Your Security
