Supported peripherals
For Alarm Panels
Paradox
MG5050, MG5050+*, SP6000, SP6000+**, SP65, EVO192 * Minimum panel firmware v1.11.001 ** Minimum panel firmware v1.10.004
DSC
PC1555, PC1616, PC832, PC864, PC1808, PC1832, PC1864, PC5005, PC5010, PC5015, PC5020
Texecom
Premier 412, Premier 816, Premier 816 PLUS, Premier 832 Elite 24, Elite 48, Elite 64, Elite 88, Elite 168 Premier 168 - Coming Soon Elite 640 - Coming soon
IDS
805, 806*, X16*, X64*, X64 Serial* * Requires an adapter board - sold separately.
Feature
Paradox
IDS
Texecom
DSC
Area & zone label sync
Multi-area control
Arm
Disarm
Stay arm
Part arm
Zone status
AC status
Bypassing
PGM
Remote programming
Alarm Panels compatible with Olarm LINK
Paradox
MG5050
MG5050+
SP6000
SP6000+
SP65
EVO192
Texecom
Premier 412
Premier 816
Premier 816 PLUS
Elite 24
Elite 48
Elite 64
Elite 88
Elite 168
IDS
806
X16
X64
X64 Serial
For Nemtek Electric Fences
Supported models
Druid 13LCD, 15LCD, 18LCD, 25LCD, 28LCD Merlin 4i Merlin Stealth M28S, M28X
Status
Druid
Merlin 4i
Merlin Stealth
Fence/zone state
Fence voltage mode
AC power status
Battery status
Service state
Gate status
Tamper
Energizer
Druid
Merlin 4i
Merlin Stealth
Turn on/off
Clear/reset
Siren/strobe - enable/disable
Service alarms - bypass/reset
Fence voltage - set high/low
Zones
Druid
Merlin 4i
Merlin Stealth
Turn on/off
Bypass/unbypass
Set voltage - high/low
Gate Alarm
Druid
Merlin 4i
Merlin Stealth
Set immediate/delayed
Chime enable/disable
For JVA Electric Fences
Supported models
Z-Range: Z11, Z13, Z14, Z18, Z114, Z28
Status
Z Range
Fence/zone state
AC power status
Battery status
Energizer
Z Range
Turn on/off
Clear/reset
Siren/strobe - enable/disable
Fence voltage - set high/low
Zones
Z Range
Turn on/off
Set voltage - high/low
Feed/return voltage
Gate Alarm
Z Range
Gate enable
Gate bypass
Peripheral connection
Protocols
Serial & Keybus depending on peripheral make & model
Standard cable length
1.5m
Maximum cable length
8m
Connectors
1 x 4 pin white Molex connector 1 x 5 pin white Molex connector
See installation guide for more information.
Signals
Contact ID
Remote Connect serial bridge
Using Olarm Remote Connect, remotely access serial ports for remote management.
Software supported
Babyware Wintex IDSwift
Mechanical Specifications
Packaged weight:
180g
Packaged dimensions:
150 x 150 x 46mm
Device weight:
93g
Cable weight:
40g
Device dimensions:
125mm diameter & 33.5mm height
Enclosure material:
ABS - Resin MG47F
Status indicator:
RGB LED
Power supply
7 to 24VDC
Typically supplied from the alarm panel / electric fence energizer via the cable provided.
Operating conditions
Temperature
–40 to 60°C
Humidity
0 - 90% RH
Radio / Wireless Technology
Connectivity
Simultaneous multi-path 4G / 2G & WiFi
Mobile connectivity
2G and/or 4G depending on model & coverage.
Frequency Bands:
LTE-FDD: B1/B3/B5/B7/B8/B20 2G: GSM900, DCS1800
Antenna type:
Internal
SIM Cards
South Africa:
2 x Olarm managed local SIMS
Global:
1 x Olarm managed roaming SIM
Mobile network switching
<60s (Depending on network availability)
WiFi
WiFi standards:
2.4GHz only - IEEE 802.11b/g/n
Center frequency range of operating channel:
2412 ~ 2484 MHz
Antenna type:
Internal
Data rate:
20MHz: 11b: 1, 2, 5.5 and 11 Mbps 11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 11n: MCS0-7, 72.2 Mbps (Max) 40MHz: 11n: MCS0-7, 150 Mbps (Max)
Tx Power:
13 to 19.5 dB (Data rate dependant)
Rx Sensitivity:
-69 to -97 dBm (Data rate dependant)
Encryption:
WPA2-PSK
WPS set up:
Yes
Encryption
TLS 1.2 / AES-128
Configuration
Plug-and-play zero configuration via QR Code Scan in the Olarm APP.
Olarm APP users
Unlimited.
The Olarm PRO 4G will require an active subscription to function. Please contact your installer or speak to sales@olarm.com for more information.
Certifications, accreditations & test reports
Safety & Health
EN 62368-1:2014+A11: (2017)
IEC 62368-1: (2014)
Electromagnetic Compatibility
ETSI EN 301 489-1: V2.2.3 (2019-11)
ETSI EN 301 489-3: V2.1.1 (2019-03)
ETSI EN 301 489-17: V3.2.4 (2020-09)
ETSI EN 301 489-52: V1.1.0 (2016-11)
EN 50130-4: 2011+A1: (2014)
Radio Spectrum Efficiency
ETSI TS 151 010-1 V12.8.0 (2016-05)
ETSI EN 300 220-1: V3.1.1 (2017-02)
ETSI EN 301 511: V12.5.1 (2017-03)
ETSI EN 300 220-2: V3.2.1 (2018-06)
ETSI EN 300 328: V2.2.2 (2019-07)
ETSI EN 301 908-1: V13.1.1 (2019-11)
ETSI EN 301 908-13: V13.0.1 (2019-08)
Included in the box
1x Olarm PRO 4G
1x Reversible 1.5m Peripheral cable
1x Mounting Template: Drill hole template and LED colour legend
Mounting hardware
Accessories
Cables & Adapter Boards
Olarm PRO devices include a standard cable, but longer cables are available if needed. Additionally, an adapter board for selected IDS panels is offered for seamless integration.
